“Formal education will make you a living; self-education will make you a fortune.” ― Jim Rohn

CIVIL-Faculty-Achievements

CIVIL-Faculty-Achievements

Mr.M.Perarasan

  1. Participated One week Quality improvement programme on”Advanced in Fracture Mechanics and Structural Dynamics Applications in Earthquake Engineering” in Coimbatore Institute of Technology from 7th – 13th April 2018.
  2. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology.
  3. Perarasan M , Krishnakumar S, Niranjani E, Dr. Suji D , (2016) “Experimental Study on Concrete Using Waste Marble Powder and Quarry Dust as Partial Replacement of Cement and Fine Aggregate” International Journal of Civil and Structural Engineering Research
  4. Perarasan. M ,Narayanan.A, M Kartic Kumar.M , Dr.suji.D (2016)“Experimental study on partial replacement of fine aggregate with quarry dust and saw dust” International Journal of Advancement in Engineering Technology, Management and applied Science
  5. Lejumol.T.U, Dr.D.Suji, Niranjani, M.Perarasan , (2016) “Experimental Study on Sulphate Attack in Granite Powder Concrete with GGBFS” International Journal of Civil and Structural Engineering Research
  6. P.Rajalakshmi, Dr.D.Suji, Niranjani, M.Perarasan , (2016) Studies on “Strength Characteristics on Utilization of Waste Ceramic Tiles as Aggregate in Concrete” International Journal of Civil and Structural Engineering Research
  7. M.Perarasan, R.Aarumugam (2013)“Experimental Study on Hybrid Fiber Reinforced Concrete with Steel and Polypropylene Fibers” International Conference on Futuristic Trends in Civil Engineering” International Society Automation (ISA)

Mr.D. Loganathan

  1. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology.
  2. Participated three days FDP on Total station and GIS 2018-2019 organized by Dr. NGP Engineering college.

Mr.P. Prabhakar    

  1. Participated One week Quality improvement programme on “Advanced in Fracture Mechanics and Structural Dynamics Applications in Earthquake Engineering” in Coimbatore Institute of Technology from 7th – 13th April 2018.
  2. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology.

Ms.B.Aquino Jancy Rani

  1. Attended Three days Faculty Development Programme organized by PALS IITm from 0.12.2017 to 03.12.2017.
  2. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology

Mr.RA.Arvinth

  1. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology.

Mr.M.S. Kaviraj

  1. Attended Three days Faculty Development Programme organized by PALS IITm from 0.12.2017 to 03.12.2017.
  2. Participated Three day Faculty Refresher Programme 2018 – 2019 organized by Adithya Institute of Technology.

Dr.M.Suji

  1. GopalakrishnanV, Suji Mohankumar “ Bio Kinetic analysis on treatment of Textile dyeing waste water using Hybrid up flow anaerobic sludge blanket Reactor” -International Journal of Applied Engineering Research, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 19 (2015)
  2. Gopalakrishnan, D. Suji and R. Gobinath (2015)“Comparative studies on advance waste water pretreatment system for textile dyeing industries . A case study of three plants in Tirupur District, Tamil Nadu- International Journal Pollution Research, Poll Res. 34 (1) : 207-214.
  3. C, Suji. D, Mariappan. M “Conversion of bleaching and dyeing effluents sludge and Textile spinning mills waste into fuel”- International Research Journal of Pharmaceutical and Applied Sciences, 4(5):9-12
  4. Gandhimathi, A, Suji, D, Elayarajah, B (2015) “ Bacterial Concrete : Development of concrete to increase the compressive and split tensile strength using Bacillus Sphaericus” -International Journal of Applied Engineering Research. Volume 10, Number 3 pp. 7125-7132
  5. Gandhimathi, A, Suji, D, Rajesh, R, Elayarajah, B “Potential application of Bacterial Inoculum to increase different mechanical strength in the prepared concrete”-International Journal of Innovative research Engineering and Technology, Vol. 4, Issue 3, DOI: 10.15680/IJIRSET.2015.0403075
  6. Muthukani, C. Suji, D., Mariappan , ”A study on Zero liquid discharge of textile sector in India Vs orders of honorable high court of Madras, Journal of Industrial pollution control ,Vol 31(1) 2015
  7. Muthukani, C. Suji, D, Mariappan, M. and Gopinath, R “Studies on Recycling of Sludge from Bleaching and Dyeing Industries in Cement Industries” Pollution Research ,209-214,2015.
  8. Suji, D (2015),”Effective Colour Removal Technique For Bleaching & Dyeing Industry Effluents With Cost Estimation” pp. 711-718, Vol 10,No 2 (2015)
  9. Suji, D (2015 ) A SWOT analysis of the proposed transshipment port in Great Nicobar Island of Andaman Nicobar Islands”Inter National Journal of Applied Environmental Sciences Volume 10,Number 3 pp1049-1064
  10. Suji, D (2016) Treatment of Waste Foundry Sand using Fungi: An Approach for the Application in Manufacture of Concrete” in the International journal, ” International Journal of Applied Engineering Research”ISSN 0973-4562,Vol 11,No 3, (2016) pp 1849-1853
  11. Sheba Sam, M. Perarasan, Dr D Suji (2015), “Study on residual properties of Polypropylene fiber reinforced concrete under elevated temperatures” International Journal of Emerging technology and advanced Engineering , Vol 5, Issue 6 June 2015,178-182
  12. Nithya, P. Srinivasan, Suji D, P Lokeshkumar (2015) A comparative study on bond strength of reinforcing steel in bottom Ash concrete and controlled concrete, Inter National Journal of Innovative Research in sciences, Engineering and technology vol 4, Special issue 6, , pp 1770-1776

Dr.M.Kartic Kumar

  1. Kartic Kumar, and Kaviraj M.S (2016), “Assessment of Shoreline Changes Due to Anthropogenic Activities using Remote Sensing & GIS” International Journal of Engineering Research & Technology (IJERT), Volume 4, Issue 20, pp 13 – 17.
  2. Kartic Kumar, MArumugam and Elangovan. K  (2016),  “Assessment Of Groundwater Quality In Tirupur Environs, Tamil Nadu, India” International Journal of Engineering Research & Technology (IJERT), Volume 4, Issue 20, pp 07 – 12.

 Conference Paper Presented

  1. Kartic Kumar and Anugraha.G (2016) “Groundwater Vulnerability Zonation Mapping Using Drastic and Geospatial Approach – A Case Study of Coimbatore City, Southern India, Tamil Nadu” Proceedings of National Conference on “Application of Geospatial Techniques for Sustainable Development”, organized by Department of Civil Engineering ,Adithya Institute of technology, Coimbatore, March 2016
  1. Kartic Kumar and R.Annadurai (2016) “Geo Statistical Analysis Between Climatic Parameters And Sensitivities Of Climate – A Case Study Of Cauvery Basin” Proceedings of National Conference on “Application of Geospatial Techniques for Sustainable Development, organized by Department of Civil Engineering ,Adithya Institute of technology, Coimbatore, March 2016