“Intelligence plus character-that is the goal of true education.” ― Martin Luther King Jr.

ME-Faculty-Achievements

ME-Faculty-Achievements

International Journals research papers details

Sl. No. Authors Title of the Paper Name of the Journal

Volume and issue

No.

Year Impact Factor

Sl. No. in

Annexure I/II

1 M.Natarajan, V.Senthil, S.R.Devadasan, N.Vijaymohan and P.R Shalij Adoption of six sigma concept in New Product Development: a literature survey     and analysis International Journal of Services and Operations Management

Vol:8

No;4

Page No: 487 to 515

2011 S No: 5197 in the updated list of Anna University February 2016
2 M.Natarajan, V.Senthil, S.R.Devadasan and N.Vijaymohan QUARNEWSS: a model for applying Six Sigma framework to achieve continuous quality and reliability improvement in new product development International Journal of Productivity and Quality Improvement.

Vol:7

No;1

Page No: 44 to 73

2011 S No: 5162 in the updated list of Anna University February 2016
3 M.Natarajan, V.Senthil, S.R.Devadasan, N.Vijaymohan and N.M.Sivaram Quality and reliability in new product development: A case study in compressed air treatment products manufacturing company

Journal of manufacturing Technology management

(Emerald publishers, UK)

Vol: 24

No;8

Page No: 1143 to 1162

2013 Not appearing in Anna University list
4 B. Shanmugasundaram Analysis of Cutting Tool – Workpiece System with PID Controller National Journal of Manufacturing Technology Today

Vol. 6,

No. 7

2007
5 B. Shanmugasundaram Performance Investigation of PID Controller in Turning Operation International Journal of Applied Engineering Research

Vol. 9,

No. 24

2014

Annexure II

Sl. No. 8565

6 B. Shanmugasundaram Synthesis of Zinc Oxide Nanoparticles in the Surface Modification of Textile Materials

GE – International Journal of Engineering Research

 

Vol. 3,

No. 10

2015
7 B. Shanmugasundaram Temperature Distribution While Grinding Al/SiCP Composites International Research Journal of Mathematics, Engineering and IT

Vol. 2,

No. 10

2015
8 B. Shanmugasundaram Dynamic Analysis of Vibration in Lathe Tool Post During Turning Operation GE – International Journal of Engineering Research

Vol. 3,

No. 10

2015
9 B. Shanmugasundaram Influence of Process Parameters on Distribution of Carbon Fibres in Aluminium Matrix Composites GE – International Journal of Engineering Research

Vol. 3,

No. 11

2015
10 B. Shanmugasundaram Design and Development of TDOF System with PD Controller for Turning Operation Asian Journal of Applied Sciences

Vol. 4,

No. 1

2016

Annexure II

Sl. No. 1876

11 R.M.Udhaya Chandran Mechanical & Microsturcture Behavior of Magnesium During Severeplastic Deformation Process International Journal of Applied Engineering Research (IJAER) Vol.No:10 ISSN 0973-4562 2015 II
12 R.M.Udhaya Chandran Severe Plastic Deformation of Aluminium 6061 Using Equal Channel Angular Pressing. International Journal of Applied Engineering Research (IJAER) Vol.No:10 ISSN 0973-4562

 

2015

II

 

13

R.M.Udhaya Chandran

 

 

 

Optimization of Process Parameters to Minimize the Casting Defects International Jounal of Advanced Research in Engineering Science & Technology (JAEST) Vol.No:3 ISSN 2319-1120 2013 3.53 -
14

R.M.udhaya Chandran

B.Umesh

A.Karthick

K.T.Shabarinathan

 

A Study on Mechanical Properties on LM6 Aluminium Alloy by Varying Magnesium(Mg) Content Using Stir Casting Journal of Emerging Technologies and Innovative Research (JETIR)

Vo.No: 3

ISSN 2349-5162

2016 3.51 -
15 V.Ganeshan

Analysis of kerf width and cutting speed characteristics of aluminium/tungsten carbide composites

 

 

Journal of Mineral Metal and Material Engineering 1 & 47-56 2015 - -
16

B.Umesh

 

A Study on Mechanical Properties on LM6 Aluminium Alloy by Varying Magnesium(Mg) Content Using Stir Casting Journal of Emerging Technologies and Innovative Research (JETIR)

Vo.No: 3

ISSN 2349-5162

2016 3.51 -
17

Vijayakumar.S

Sreesankar.J

Rajesh.S.P

Efficiency Analysis and Enhancement of Heat Recovery Steam Generator of a Combined Cycle Power Plant through Incorporation of AdditionalBank of Tube in the Economizer

 

International Journal of ScientificResearch Engineering & Technology

Volume-4

121165

June 2015 1.24
18

R.M.udhaya Chandran

B.Umesh

A.Karthick

K.T.Shabarinathan

A Study on Mechanical Properties on LM6 Aluminium Alloy by Varying Magnesium(Mg) Content Using Stir Casting Journal of Emerging Technologies and Innovative Research (JETIR)

Vo.No: 3

ISSN 2349-5162

2016 3.51 -

Research Papers presentation in International and National Conference details

Sl. No. Authors Title of the Paper International/National Conference Year
1 M.Natarajan, V.Senthil and S.Dhinakararajan Target costing International Conference Team Tech held in the year 2007 held at Indian Institute of Science (IISc), Bangalore
2

M.Natarajan,

V.Senthil and R.Sivakumar

Optimization techniques in new product development International Conference Held in 2008atKarpagam College of Engineering, Coimbatore.
3. M.Natarajan,V.Senthil and R.Sivakumar

Case study on integration of Total Quality Management and Six Sigma for New Product Development

 

International Conference Held in 2008 at Coimbatore Institute of Technology, Coimbatore
4. M.Natarajan,V.Senthil and R.Sivakumar

Case study on integration of Total Quality Management and Quality for New Product Development

 

International Conference Team Tech held in the year 2008 held at Indian Institute of Science (IISc), Bangalore
5. M.Natarajan,V.Senthil and R.Sivakumar

A case study on energy optimization using design of condenser for refrigeration system

 

International Conference Held in 2008 at Dr.Mahalingam College of Engineering and Technology, Pollachi
6 M.Natarajan,V.Senthil and R.Sivakumar Application of Six Sigma in New Product Development National Conference Held in 2007 at Bannari Amman Institute of Technology, Sathyamangalam

 

7

M.Subramanian, Dr.N.Saravanakumar, Dr.Gukanrajaram, Dr.C.SathyaNarayanan

Parametric Optimization for Forming Load and Thickness in micro deep drawing process using FEM based Taguchi method

 

International Conference 2016
8 B. Shanmugasundaram

Dynamic Analysis of Workpiece – Tool System with PID Controller

 

National Conference 2005
9 B. Shanmugasundaram

Development of Two Degree of Freedom Model with Controller for Turning

 

National Conference 2005
10 B. Shanmugasundaram

Temperature Distribution While Grinding Al/SiCP Composites

 

National Conference 2007
11 B. Shanmugasundaram

Dynamic Analysis of Effect of Cutting Tool Damping on System stability for Turning Operation

 

National Conference 2010
12 B. Shanmugasundaram

Design of Three Axes Hydraulic Tipper

 

National Conference 2010
13 B. Shanmugasundaram

Synthesis of Zinc Oxide Nanoparticles and its Applications in the Surface Modification of Textile Materials

 

National Conference 2010
14 B. Shanmugasundaram

Design and Development of TDOF System with PD Controller for Turning Operation

 

National Conference 2011
15 B. Shanmugasundaram

Dynamic Analysis of Vibration in Lathe Tool Post During Turning Operation

 

National Conference 2013
16 B. Shanmugasundaram

Dynamic Analysis of Workpiece – Cutting Tool System Using Turning Operation Controller

 

International Conference 2013
17 B. Shanmugasundaram

Analysis on performance of Controllers in Turning Operation

 

International Conference 2014
18 B. Shanmugasundaram

Comparative Analysis on performance of PI and PID Controllers During Turning Operation

 

International Conference 2015
19 B. Shanmugasundaram

Effect of Stirring Speed Variation in Carbon Fibre Reinforced Aluminium Matrix Composites

 

International Conference 2016
20 V.T.Vijayaraj

Influences of Grinding Parameters on Forces and Energy in Grinding AL 7075/ SICP Components.

 

National Conference

2015

 

21 V.T.Vijayaraj

Investigation of Modern Muffler Acoustic Characteristics of Perforated Muffler in Multi Cylinder Engine.

 

National Conference 2012
22 R.M.udhaya Chandran

Analysis of Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
23 R.M.udhaya Chandran

Sever Plastic Deformation Process using Magnesium AZ31 Alloy

 

International Conference 2016
24 R.M.udhaya Chandran

Experimental Study and Analysis of Dry Lathe Turning Operations on Aluminium 6063 Using RSM

 

International Conference 2016
25 R.M.udhaya Chandran

Analysis of Magnesium AZ31 by Using Sever Plastic Deformation Process

 

International Conference 2016
26 R.M.udhaya Chandran

Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
27 R.M.Udhaya Chandran

Mechanical and Micro Structural Behavior of Magnesium during Severe Plastic Deformation Process

 

International Conference 2015
28 R.M.Udhaya Chandran

Severe Plastic Deformation of Aluminium 6061 Using Equal Channel Angular Pressing

 

International Conference 2015
29 R.M.Udhaya Chandran

Optimization of Process Parameters to Minimize the Sand Drop Defect

 

National Conference 2014
30 R.M.Udhaya Chandran

Investigation of Process Parameters to Minimize the Casting Defects Using Taguchi Method

 

International Conference 2014
31 R.M.Udhaya Chandran

Sliding Wear Behavior of Glass Fiber Reinforced Epoxy Resin Composite and Optimization

 

National Conference 2014

 

32

 

 

V.Ganeshan

Optimization on WEDM in Tungsten Carbide/ Graphite withAluminumHybrid Composites Using RSM International Conference on Contemporary Innovations in the Sphere of Mechanical Engineering and Management ICCISMEM’15

 

2015

33

B.Umesh

 

Analysis of Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
34

B.Umesh

 

Sever Plastic Deformation Process using Magnesium AZ31 Alloy

 

International Conference 2016
35

B.Umesh

 

Experimental Study and Analysis of Dry Lathe Turning Operations on Aluminium 6063 Using RSM

 

International Conference 2016
36

B.Umesh

 

Analysis of Magnesium AZ31 by Using Sever Plastic Deformation Process

 

International Conference 2016
37

B.Umesh

 

Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
38

B.Umesh

 

An Heuristic Approach to Minimize Makespan in single machine scheduling under Identical Parallel Machines

 

International Conference 2012
39 A.C Ramkumar

Electro chemical studies of Ti-TiB Cpmposites

 

International Conference 2013
40 A.Karthick

Analysis of Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
41 A.Karthick

Sever Plastic Deformation Process using Magnesium AZ31 Alloy

 

International Conference 2016
42 A.Karthick

Experimental Study and Analysis of Dry Lathe Turning Operations on Aluminium 6063 Using RSM

 

International Conference 2016
43 A.Karthick

Analysis of Magnesium AZ31 by Using Sever Plastic Deformation Process

 

International Conference 2016
44 A.Karthick

Mechanical Behavior of Aluminium – Silicon Carbide Particulate Metal Matrix Composite

 

International Conference 2016
45 A.Karthick

Analysis of Mechanical Behavior of Aluminium A356 – Silicon Carbide Particulate Metal Matrix Composite

 

National Conference 2015